Outdoor Dual-Lens WFl Camera Quick Start Guide
Camera Introduction
- Power on reset.
- Please insert the camera adapter, press and hold the reset button for 5 seconds to reset the camera until you hear “Di-“and continue to wait for “Di-” 2 times, and the camera will complete the self-test.
Sign up & Login
Register an account: Click “Register” > enter your email address and your APP passcode, check the verification code, wait for the verification to be completed, and then jump directly to the APP list.
Note: if you don’t want to register an account, it can’t remote, but you can use stand-alone mode to view the camera. This mode only supports the Local view.
WiFi connection
Please insert the camera adapter, press and hold the reset button for 5 seconds to reset the camera until you hear “Di-” Continue to wait for “Di-” 2 times and the camera will complete the self-test.
- In the APP: click”+”>select “WiFi connection’
- Check “Hear the device announce didi”; Click “Next”
- Follow the prompts shown in the app (please connect WiFi to JAA-**** and go back to the Cam720 APP).
- Enter the correct password for the WiFi connection of your phone and click “Next”.
- When the device is connected, pls wait patiently for unicameralism online” and then click the video to view.
Wired Connection
Plug the power supply and Ethernet cable into the router: Pls plug the adapter for the camera, and connect the camera with the Ethernet cable to the router.
Reset the camera: Long-press the reset button about 5-8s until you hear Prompted, select the wired connection to connect it.
NOTE: Pls confirm the cellphone is connected to the same wifi as the router that the camera is connected to. If the camera has a Network port, it supports wired/WiFi connection, otherwise, pls select a Wi-Fi connection to connect.
- Return to the device list
- Share the device
- More function settings
- Switch image effects
- Turn on the microphone
- Screenshot to save the image
- Open the full-screen image
- Screen recording feature
- Turn on the voice intercom
- PTZ rotation control
- Preset point settings
- Cruise settings
- Screen recording feature
- Turn on cloud play
- SD card Playback
- Message List
- User information
- Subscribe Cloud storage
- Add more cameras
- More functions setup
- Start Live video
- Modify the device name
- Share equipment
- SD card setup
- Detection alarm settings
- Buy cloud storage
- Cloud storage switch
- Image inverted settings
- Choose a call mode
- Enable/Disable Auto tracking
- Indicator light switch
- Choose night vision mode
- Set the time zone
- Switch WlFl network
- Camera information
- Camera version number
- Delete the camera
- Transfer the camera to another account
- PTZ rotation control
- Switch image effects
- Turn on the microphone
- Turn on the voice intercom
- Screen recording feature
- Close the video window
- Turn off full-screen images
Note:Tap the small screen 3 times in a row to switch the lens screen to each other
Bracket mounting
Installation procedure:
- Keep bracket A in the same direction as the fixed lens, then bring the camera and bracket A together, and then turn bracket A to hold them both in place.
- Put the other end of bracket A together with the slot of bracket B, and then just push it down.
- Attach the bracket B to the wall make a mark on the hole to punch holes, and use a 6mm drill bit to get the holes, then Stuff the rubber stopper into the hole.
- Select a suitable location and install expansion screws on the wall. for example, if it’s a wooden wall, expansion screws are not required.
- Align the bracket with the hole position and tighten the screws.
Look out
The wall on which the camera is installed must be able to withstand at least times the total weight of the camera and not less than 50N or 5KG
Note: Please scan the OR code inside the box to view the tutorial video for installing the bracket.
Share
Share your camera with your friends and families
1. Your friend should have an account with the cam720 APP.
2 main account, enter the Email of the friend’s APp account or scan the QR code of the account to share it.
3. Freely set the permission on this shared account.
Detection alarm settings
1. Zoned area vigilance detection, the red part represents the planned warning area.
2 . Warning information push, alarm information is pushed to the mobile phone in time through the APP background.
3. Sound alarm warns suspicious characters to leave as soon as possible, and supports custom voice.
How to use it correctly
- This product is suitable for outdoor scenes, ” waterproof”
- It should be installed in a ventilated environment as much as possible to avoid unstable factors caused by long-term closed-high temperature replacement.
- The camera and the router should be controlled within 10 meters of the partition wall, and the open environment should be kept within 20 meters.
- When using at night, do not place items in front of the camera lens and do not face the wall, glass window, mirror, etc., so as not to block. the reflection of infrared rays and affect the image quality.
- The installation area should be away from high-power equipment to avoid signal interference and affect the user experience.
Q1: What should l do if the WiFi configuration fails?
A1: Make sure the GPS Location service is on and “Allow” is selected for all app permissions;
Check the WiFi password is entered correctly, with no more than31 digits, and a letter case;
After all, steps above are completed, check router settings, such as: “blacklist”, “firewall!”, “Device Internet restrictions” etc.
Q2: How to do if the camera is offline always?
A2: Please check the connection of the camera adapter and socket, or replace the power supply. Check the wifi signal strength, make the camera closer to the router
Q3: How could multiple users view at the same time?
A3: Please use share functions with other users
By scanning the QR code below to access Youtube, Select the right operation video for your camera according to the APP and Model of the camera, Or message the seller to get the operation video directly.
